W463 - G Class

Location of the Tele-Aid module and the PSE

"Compensator and antenna switch. I thought about putting the MikBox under here but decided not to in case I need access to it."

"MikBox installed. I couldn't hook up the Mikbox the way I hoped, which would have been bolted to the metal bracket - because the male and female ends of the Mikbox don't stick out past the case far enough to achieve a good connection. I also thought of putting it on the PSE side, but the case was a bit too large. I ended up removing the screws from the Mikbox and using those to screw on the AMP end. For the other end I used a wire tie. It is snug and works well."

"These are the parts I had to remove for a good tight connection."

"COMAND shot plus where I ran the cable. I may go with the cradle down the road, haven't decided yet. I know I'll leave my phone in the glove box with the cradle. I would need a cable another 8-10 inches long to be able to route the wire such that it is less obtrusive."

Center console shot