Introduction
News
Pictures
Order
Support
Contact
5/1/2005
New firmware Version 2.13 is now available for download,
and will be shipped with all units starting now. New features: Call
Waiting, Chain Dial, Code Skip. Read the firmware release notes for
details.
3/8/2005
New firmware 2.11 is on all units shipped after 3/5/05. It allows
to choose between different phonebook memories (phone or SIM), and
also shuts down the phone after ignition is turned off, and wakes it
back up, when car is started (works only with units that have hardware
version 94 and later. There are some mikboxes with hardware version
89, 90, 91, where it might work as well. Contact me with your serial
number to find out. To check HW Version and serial number, dial
*VERSION# on V60/Timeport PSE, or *STVERSION# on StarTac PSE). Read
the firmware release notes for details.
Don't try using the update server at this time. If you want
to update your current mikbox, contact my via email. I am out of the
country until at least March 25.
2/4/2005
To all people who are waiting the MB/Mot cables: I have plenty in
stock now.
1/3/2005
I am off to the Middle East again for at least two weeks. I will
have email access, but the responses might take a little longer than
normal. Order processing will still continue.
12/14/2004
All emails, feedbacks, orders, from today and yesterday were lost,
thanks to the (ex) web-hosting provider. If you read this you are
already on the new server. The forms (order/feedback) don't work yet,
and since the DNS takes a few days to propagate, I might not receive
your email. If you need to contact me, please use the email address
that is on the contact page. Sorry for the inconvenience.
11/26/2004
The Nextel software interface is completed. If you want to know if
your Nextel phone will work with the Mikbox, and you have a serial
data cable for your phone that is connected to COM1, you can verify it
using this application.
The next challenge is the physical interface...
11/24/2004
Happy Thanksgiving to everybody !!!
11/21/2004
New firmware version 2.09 now fixes all bugs for StarTac and
Timeport that came up in the last few days (see below). Also, the lady
that sits inside the voice control module now says "dialing" when she
connects the call, and not "function not available at this time".
11/20/2004
While fixing some bugs, I will continue now with my initial number
one priority, which some of you, who have been following my progress
from the beginning, might still remember: NEXTEL PHONES.
I finally got around to continue playing with the Nextel phones,
and was able to figure out the whole deal of placing calls, answering
calls, detecting call status, as well as the whole push-to-talk
enchilada. The only part of the puzzle that is missing (besides
integrating the code into the mikbox firmware) is the physical
connection of the phone. I don't know yet if a new armrest cable will
be enough, or if I need to add some electronics to the mikbox. Stay
tuned for more news on this.
11/20/2004
Today I installed the Mikbox in a 1999 Mercedes E Wagon. Thank you
George for letting me play with you car ;-). The car was originally
equipped with a StarTac phone kit, so the only thing added was the
Mikbox and the connector cable for the armrest. The new phone is a
Verizon V260. Since the signal is strong enough in our area, the
cradle and compensator upgrade was not needed.
The StarTac PSE integration seems to work fine now. The functionality
is not much different from the Timeport PSE integration, with the
following exceptions:
Limitations of the StarTac
PSE:
-No Caller ID is shown on the
screen
-The "last calls" list is not
downloaded when the phone is connected, but the head unit keeps track of
the last calls itself
-All names from the phonebook
are shown upper-case on COMAND head units.
Issues that came up and will
be fixed with a Mikbox firmware update:
-Phonebook takes a minute to
load into head unit under certain circumstances, if the phone is connected
before the head unit is turned on
-Voice control module will say
"Function not possible" when dialing, although the dialing works fine
-When dialing with an Audio30
head unit, the display doesn't change to the called name
-When terminating call from an
Audio 30 head unit, it says "READY" although the call is still connected,
when pushing "END" a second time, the call is dropped
11/15/2004
The new firmware version 2.08 now supports the StarTac PSE and is
now being beta tested.
10/17/2004
The firmware can now also be updated with a serial cable that
directly connects a laptop or PSE with the modular connector in the
armrest. The update takes only about 20 seconds this way. Firmware
files can be downloaded from this website (see support section).
Progress on the StarTac PSE: I was able today to sync up the phone book
and answer incoming calls.
10/12/2004
New Firmware Version 2.06 is on the update server now. This is the
first version that supports V60 and Timeport PSE.
Having the COMAND made it real easy. I could recreate, isolate and
fix all audio problems. Also, the phone syncs up more reliably now.
10/10/2004
For those of you who don't know and wonder why I haven't responded
to emails during the last week: I have been moving, and it has been a
major headache. The new mikbox lab is still
covered with boxes. The worst part was when the computer that had
the firmware development system on it, literally fell off the truck.
Luckily the HD was still OK, and no data was
lost. More units are already waiting to be
built.
Finally I got a Euro-COMAND unit for testing.
Now I am able to fix a few problems that I could not recreate before.
09/28/2004
The Timeport PSE integration is now very close to be completed.
Most phone functions are integrated (such as dialing, answering,
phonebook, caller id, call waiting). The biggest issue was the
charging. In order for it to work, the Mikbox hardware needs to be
slightly modified.
09/16/2004
The next batch of units is ready. They are slightly
different, to fit into a smaller case:

09/15/2004
Good news for all you people who are dying to get away from the
TimePort phone. Today I successfully synced a V600 phonebook to a
head-unit through a TimePort PSE (part number 682-0648), and placed an
outgoing test call. It actually synchronizes faster than the V60 PSE.
Everything is still running on a simulation right now, but at least
I can say now with confidence that by the end of the month this will
be in beta.
09/14/2004
Verizon V710 is integrated and seems to work fine with the Mikbox
08/17/2004
I will be out of the country until the end of August, so my email
responses might take longer than normal.
08/12/2004
If the dialup test for the firmware update fails, make sure that
your service provider has "data calls" enabled for your account.
Apparently Cingular disables that option by default, I don't know
about other providers. So far all T-Mobile and Verizon phones seem to
do it. Having the provider turn on this option doesn't cost any money,
it might only be hard to find a competent customer service
representative, who understands what you mean when you say "I want to
use my phone like a modem, to establish data calls." Most support
people will think you want to go online with your phone and try to
sell you a subscription (if you don't already have one). But if you
find someone who knows what a data call is, you are only 5 minutes
away from the over-the-air update function to be working !!!
08/11/2004
I fixed some bugs (see firmware history). I need to install a
bug-tracker on this website, to get things more structured.
08/10/2004
First pictures of a Mik-Box integration in a G-class
here. Thank you David. If anyone
in the Chicago area is interested in seeing it working, David is
willing to show. Drop me a line on the feedback page for his contact
information.
07/28/2004
The first 10 production units are for sale now. The first 50 people
on the pre-order list have been contacted. If you were among the first
50 people to sign up (I gave position numbers to the first 100
people), and you didn't get an email, please contact me.
(old news entries)
|